1. <kbd id="gk86r"><track id="gk86r"><strong id="gk86r"></strong></track></kbd>
      <ins id="gk86r"><track id="gk86r"></track></ins>
        <samp id="gk86r"></samp>
      1. <wbr id="gk86r"></wbr>
        <p id="gk86r"><noscript id="gk86r"></noscript></p>
      2. <kbd id="gk86r"></kbd>
      3. <p id="gk86r"><noscript id="gk86r"></noscript></p><label id="gk86r"></label>
        1. ENGLISH   CHINESE

          +86-538-6513909

          +86-13905485406

          +86-13345289772

           

           

             Hydraulic Press Brake (WB67Y series)

          Features:
           * The two oil cylinder are fixed on right and left wallboard, have reasonable force, the bottom dead point is positioned by the block in oil cylinder so have a simple structure.
          * A hydraulic system is used for the machine, top driven system, the speed can be adjusted in a large range, reliable.
          * The position of the back gauge and the stroke of the ram are displayed by digital displays, and can be adjusted manually.
          * The dies are equipped with adjusting wedges of high precision.
          * Two or more WB67Y can work together.      press---->      

                               
             Hydraulic Press Brake (WB67K series)

          Features:
           Controls two hydraulic cylinders with eletro-hydraulic servo valve, assuring the synchronized movments precision of ram, synchronized precision +_0.01mm.German Bosch or hoerbiger modular hydraulic system special for press brakes, full loop controlling the synchronization of the ram.

                               press---->
             Hydraulic Gate Shears (Q11Y series)

          Features:
          * The QC11Y series shearers' frame and knife rest have a excellent structure, rigid and light.
          * The oil cylinders are connected together, synchronously.
          * Scroll orbit is used, reliable, long life, maintaining easily.
          * The cut angle can be adjusted, with very small distortion and high precision.
          * The blades gap can be adjusted quickly.
          * Light beam shearing gauge is used, for easily cut.
          * The counter can display the times of shearing, the travel distance can be adjusted, very effective.
          * There is an electrical and mechanical interlock safety bar.

                              press---->

             Hydraulic Swing Beam Shears (Q12Y series)

          Features:
          * Whole steel welded structure, and it has enough intensity and rigidity.
          * The knife rest move waveringly, no orbit needed.
          * Pressing firstly and cutting secondly, pressing pressure strengthened with cutting pressure, use safely.
          * The blades gap can be adjusted quickly.
          * Light beam shearing gauge is used, for easily cut.
          * The back-gauge can be adjusted by hand and the value can be showed on the digital display.
          * The counter can display the times of shearing, the travel distance can be adjusted, very effective.
          * There is an electrical and mechanical interlock safety bar.
                              press---->

             CNC Front Feeding Hydraulic Shears Series

          Features:
           The frame is entirely welded with steel plates and using advanced heat treatment technonogy to completely eliminate stress allows the machine to marntain the accuracy and to extend the working life of the tools and itself.
          CNC aotomatic sheets-feeder with the speed stepless,enhancing productivity.
          Lateral table with automation turn out. Feed clamp device make positioning correct and clamping reliable, ensure the workprece parallelism and precision of the shearing size.
          Netherlandish delem control system special for press brakes, LED display,automatic diagnostics, semi-full automatic modes of peration.
                              press---->

             3-Roll Bending Rolls (W11 series)

          Features:
           * The up and down of top roll and the rotation of bottom rolls are driven by motor.
          * Hydraulic overturn system is used, operating easily.
          * Cylinders and elliptical devices can be bended, cones also can be bended with attachment.
          * W11 has a central electric control system, operates and maintains easily, and performs economically.

                               press---->                  

             3-Roll Bending Rolls (W11X series)

          Features:
           * The bottom rolls are driven and can move horizontally, the top roll can move up and down, the rolls can be driven by mechanical system or hydraulic system, all the transmission shaft are connected with universal joint.
          * The top and bottom rolls' horizontal movement can be displayed numerically.
          * It has pre-bend function, plate can be pre-bended and rolled in one process, cones also can be bended with attachment.
          * The CNC system with man-machine conversation, real time control, memory and safety guard system is available.
                           

                              press---->         
             4-Roll Bending Rolls (W12 series)

          Features:
            * Metal plate can be pre-bended and rolled in one process, performed effectively.
          * W12 has pre-bend function, very little straight edge left, can be used in plate shaping and adjusting.
          * The top roll is driven by motor, the bottom roll and side rolls rotate with the top roll.
          * Cones also can be bended with attachment.
          * The up and down of bottom roll and side rolls and unload device are driven by hydraulic cylinder. A CNC system makes the two side of side rolls move synchronously.
                               press---->
                                       

             Slitting line (T44K series)

          Features:
           Cut To length line can do uncoiling, leveling, shearing and stacking works, make coil steel to sheet steel. It mainly includes coil car, uncoiler, feeder, leveler, gauge, shearer, conveyor, stacker, hydraulic system, pneumatic system and electrical system, etc. It mainly used in cold or hot rolling carbon steel, silicon steel, tinplate, stainless steel and all the other kinds of metal materials with surface spreading.
          Cut To length line is controlled by PLC system. It has a CNC controlled single shaft feeder. The information of length, shearing numbers and speed can be input to the CNC system, when the needed shearing numbers is reached the line can stop automatically. The line speed can be adjusted. It has a gauge with high precision, and whole line can work automatically and operate easily, smooth sheet can be made.
          With an optional slitting machine the line can do slitting works, or with a trimmer the line can do trimming works. The line has a highly efficient performance.
          The specifications can be changed to meet customer’s demand.

                               press---->        

             Slitting line (T46K series)

          Features:
           Cut To length line can do uncoiling, slitting and recoiling works, make coil steel to any needed width coil steel. It mainly includes coil car, uncoiler, leveler, shearer, correct device, slitting machine, scrap recoiler, tension unit, press unit, recoiler, hydraulic system and electrical system, etc. It mainly used in cold or hot rolling carbon steel, silicon steel, tinplate, stainless steel and all the other kinds of metal materials with surface spreading.
          With an optional CPC control system, the coil feeding easily, protect the coil and make a high precision, and effectively. With an optional EPC control system, the coil can be recoiled neatly, especially to wide coils.
          This line can be adjusted to do recoiling or dividing work to meet customers’ demand.
          PLC system is used to select the information from every part of the line, centrally controlled. There also has speed self adjust and keep memory after lost power supply function. So the line has a highly efficient performance.
          The specifications can be changed to meet customer’s demand.

                               press---->   

             Cut to length s & slitting line(T45K series)

          Features:
            Cut to length & slitting line can do slitting and shearing work. It make cut to length line and slitting line into one product line. It meets the demand of the company which has large quantities of products. It mainly includes coil car, uncoiler, first leveller, slitter, scrap recoiler, tension unit, recoiler, unload car, leveller, gauge, shearer, stacker, hydraulic system, pneumatic system and electrical system.
          The line is central controlled. The electrical panel has functions like length setting, numerical displaying, automatic counting, speed adjusting, manual feeding, continuous shearing and alarming.
          The specifications can be changed to meet customer’s demand.

                                 press---->

             
             CNC controlled Straightener (LWJ series)

          Features:
           This straightener has the advantage of tension straighterner and roll straightener. Sheet can be flattened by the force of tension rolls and bending rolls, and getting rid of all kinds of distortions, and improving the sheet’s mechanical performance.
          This straightener not only can do stretching and straightening work, but also can do length gauging, weighting, dividing, cleaning and oiling work. Numerical control and network techniques being used in the control system, so it has process displaying, parameter displaying, failure diagnosing and automatic alarming functions. This straightener has a highly effective performance and precision and can straighten variety of coil.
          The specifications can be changed to meet customer’s demand.

                               press---->

                       

                            
             Leveler

          Features:
           W43 and W43G series multi-rolls levelers are used in steel sheets or strips’ cold leveling. W43 series have a compact structure and operate easily. W43G series have a frame structure and the beam can move up and down. The top roll can be adjusted to lean state, to making a harmony damply leveling to improve the leveling quality. W43 and W43G series levelers have highly effective performance and precision and operate easily. They can work separately, or work with other machines to making a product line. They can be widely used in metallurgy, shipbuilding, boiler-making and machinery industries.                          

                                press---->
             W24S series 3-roll bender

          Features:
            *This machine is used for flat steel bending, the upper roll can be adjusted, vertically fixed, with a compact structure and easily used.
          * All the 3 rolls are driven rolls, the speed matching can be easily adjusted, and the devices can not skid.
          *The bottom rolls are driven by hydraulic cylinder, numerical displayed, with high precision.
          *The molds are well designed, the feed in pressure can be adjusted, the bending diameter can be adjusted.
          *The flat steel can be feed in from one side, and the bending product can be easily discharged.
          *The rolls driven and up and down movement can be controlled with control panel. The spring size concentric circles can be made in once feed in.
                               press---->

                  
           
           
          Copyright 2006-2008 Taian Fengli Machinery Co., Ltd.   Tel:+86-538-6513909  E-mail:fljxgs@163.com
          亚洲tv国产在线永久播放-黄在线看片免费人成视频-夜夜爽8888免费视频-欧美乱人伦视频在线观看
          1. <kbd id="gk86r"><track id="gk86r"><strong id="gk86r"></strong></track></kbd>
            <ins id="gk86r"><track id="gk86r"></track></ins>
              <samp id="gk86r"></samp>
            1. <wbr id="gk86r"></wbr>
              <p id="gk86r"><noscript id="gk86r"></noscript></p>
            2. <kbd id="gk86r"></kbd>
            3. <p id="gk86r"><noscript id="gk86r"></noscript></p><label id="gk86r"></label>